A blind flange is a solid disk used to block off a pipeline or to create a stop.
Similar to a regular flange, a blind flange has mounting holes around the perimeter and the gasket sealing rings are machined into the mating surface. The difference is that a blind flange has no opening for fluids to pass through. Instead, it is placed in between two open flanges, which stops the flow through a pipe. Many times this type of blockade is used when adding another line onto an existing pipeline or when a new valve is being added.
Often a blind flange is inserted into a pipeline when a repair is required further up the line. This allows the flanges down stream to be disconnected without fear of losing liquid. Many times this type of blockade is used when adding another line onto an existing pipeline or when a new valve is being added. This blockade is also used to shut down a line when it is no longer needed.
Without the blind flange it would be difficult to perform maintenance or repairs on a pipeline. The flow would need to be shut off at the nearest valve, which could be miles away from the repair area. Valves are also very expensive and are prone to sticking. The blind flange is a much more cost efficient way of sealing a pipe.
When a pipeline is being constructed, a blind flange is often incorporated into the final length of pipe. This design allows for expansion or continuation of the pipeline by simply adding onto the final flange. This holds true for the addition of tees in the pipeline as well. A tee can be installed and then blocked in order to leave the option of running a pipe at a later date.
The use of flanged pipe has allowed pipelines to be built in a much faster manner than traditional welded seam pipelines. Moreover, it has made the task of repair and sectional replacement a simpler job. Sections of pipe can now be assembled anywhere in the world and shipped to the job site. Once there, they can simply be bolted into place and the pipeline can resume transportation of its liquid cargo.
Where are Blind Flanges Most Commonly Used?
Blind flanges are commonly used in petrochemical, pipe engineering, public services and water works.
A blind flange is useful for making repairs to a pipeline further up the line. In fact, during construction of a pipeline, a blind flange may be built into the final length of pipe. This allows for expansion or continuation of the pipeline simply by adding onto the final flange.
What Do Blind Flanges Do?
The use of flanged pipe has significantly sped up the process for constructing pipelines. It has also made the task of repair and sectional replacement easier. Sections of pipe can now be assembled anywhere in the world and shipped to the job site. Once there, they can simply be bolted in place and the repair is done.
What Do Blind Flanges Do?
A blind flange is useful for making repairs to a pipeline further up the line. In fact, during construction of a pipeline, a blind flange may be built into the final length of pipe. This allows for expansion or continuation of the pipeline simply by adding onto the final flange.
BLIND FLANGE IN CREATE A STOP
 |
BLIND FLANGE IN BLOCK OFF A PIPELINE
 |
Without a blind flange, it would be next to impossible to repair or perform ongoing maintenance to a pipeline unless the flow was shut off at a earlier valve, which could affect miles of pipeline.
